Garage Door Spring Replacement Cost Guide — Fort Collins

How much does garage door spring replacement cost in Fort Collins? Honest torsion & extension spring price ranges, cycle ratings, and what's fair.

A broken garage door spring is the single most common reason a door won't open — and it's almost always an urgent call because your car is trapped. This guide breaks down honest spring replacement costs in Fort Collins and Northern Colorado so you know what's fair before a technician arrives.

First, a safety note: never try to unwind or replace a torsion spring yourself. They hold enormous stored energy and are the #1 source of serious garage door injuries. This is always a professional job.

Torsion Spring Replacement Cost

Torsion springs (the springs on the bar above the door) are the standard on modern doors. A single torsion spring replacement in Fort Collins typically runs $185–$285 installed. We almost always recommend replacing both springs as a set ($285–$385), because if one broke, the other is the same age and will fail soon — and a dual-spring setup shares the load so both last longer.

High-cycle springs rated for 25,000+ cycles add about $40–$80 and are worth it: they last 2–3x longer than standard 10,000-cycle springs, meaning fewer emergency calls over the door's life.

Extension Spring Replacement Cost

Extension springs (the springs that stretch along the horizontal tracks) are older and less expensive — typically $135–$225 installed. They don't last as long as torsion springs and must include safety cables, which run through the spring to contain it if it snaps. If a quote for extension spring work doesn't include safety cables, that's a red flag.

Why Spring Quotes Vary So Wildly

A fair spring replacement is a $185–$385 job in Fort Collins. If you're quoted $700, $900, or $1,200+ for a spring, that is almost always an upsell — the same spring is being marked up many times over, often by a commission-based tech. Get a second opinion. We do free, no-pressure spring quotes across Northern Colorado.

Legitimate price differences come from door size (heavy custom doors need stronger springs), cycle rating, and dual-vs-single. Everything else should be transparent and itemized.

How to Get a Fair Spring Quote

Ask for the spring's cycle rating and wire size in writing. Ask whether both springs are being replaced. Ask for the service-call fee and whether it's credited toward the repair. A reputable company answers all of this on the phone. We always do — call 970-408-9827.

We stock common springs on our trucks, so most spring replacements are done the same day, often in about an hour, and include a FREE tune-up of the whole door.